PC Server 720, Type 8642 (Models OZO, 1Z0, 2ZS, 4ZS)

  Specifications

  Diagnostic Information  

  166 MHz Proc.-Option II - NETWORK OPERATING support - Install

•  Adminstration Monitoring Utilities
  •  Backing Up the Disk-Array Configuration
  •  Restoring the Disk-Array Configuration
  •  Using the Advanced Functions
    •  Changing the Write Policy
    •  Formatting Drives
    •  Changing the RAID Parameters
•  Configuring the Disk Array
  •  RAID Technologie
  •  Hard Disk Drive Capacities
  •  Additional Storage Capacity
  •  The RAID Configuration Program Screens
•  ServeRAID - Adapter Manual
•  DASD Tray SCSI IDs/LED (Hot-Swap)
•  Drive Maintenance
  •  Obtaining Drive Status
    •  Bay/Array Selection List
  •  Results of a Hard Disk Drive Failure
  •  Logical and Hard Disk Drive Status Indications
  •  Replacing a Faulty Drive
•  Drivers
•  Front Operator Panel
•  Installing Internal Drives (Type 8642)
  •  Considerations
•  LEDs-System Board and Adapter
•  Light Emitting Diodes/Liquid Crystal Display

  Performing Common Tasks (RAID Configuration)

•  Defining a Hot-Spare Drive
•  Deleting a Disk Array
•  Creating a Disk Array
•  Adding Drives to Create an Additional Array
•  Defining Logical Drives

  Power Supplies

•  Power Supply LED and Button
•  Primary Power Supply Voltages
•  Optional Power Supply Drive Connector Voltages
•  Power Supply Shutdowns
•  Redefining Space in an Array
•  Removing a Drive from Bank C, D or E
•  Service Processor Requirements
•  Specifications
•  Starting or Stopping the System
  •  Starting or Powering-On the System
  •  Stopping or Powering-Off the System
  •  Power-On/Off Scenarios
•  Starting the RAID Configuration Program
•  Undetermined Failing Processor Diagnostics
•  Viewing the RAID Configuration

  Locations

•  Bays
•  Connectors (Rear View)
•  Controls/Indicators (Front View)
•  Hot-Swap Backplane
•  SCSI-2 Fast/Wide RAID Adapter/A
•  SCSI Fast/Wide PCI Adaptec Adapters

•  Corollary Error Codes
  •  Checkpoint Codes (CP)
  •  Test Error Indication (EP)
  •  Test Point Codes (TP)
  •  Multiprocessor Error Indication (IP and FP Codes)
  •  Halt Indications (Halt)
  •  No Beep Symptoms
  •  Beep Symptoms

  Error Codes

•  Error Messages
•  SCSI/Non-SCSI Error Code Format
•  PCI Error Format and Error Codes/Messages
•  Testing PCI Adapter Cards
•  Accessing/Checking the PCI Device List

  Parts Listing

Please see the LEGAL  -  Trademark notice.
Feel free - send a   for any BUG on this page found - Thank you.