|
|
|
DDDD DDS0 VVVVIIII
------+|| ---+---+
||| | +--PCI Device ID
||| +------PCI Vendor Number
||+-Reserved (usually 0)
|+PCI Slot Number (0 = System board)
+-PCI Device Error
For example, PCI error code 005A210vvvviiii decodes as follows:
005A 02 PCI device disabled due to Built-in Self Test failure
1 The device is in PCI slot number one.
0 Reserved.
vvvv Could be any number (PCI vendor ID)
iiii Could be any number (PCI device ID)
PCI Error Codes
| Error Code | FRU/Action |
|---|---|
| 00900100vvvviiii | 1. System Board |
| (System board PCI device | |
| does not respond) | |
| 009002s0vvvviiii | 1. If S <> 0, replace the PCI adapter. |
| (PCI device Built-in Self | - or - |
| Test failure) | If S = 0, replace the system board. |
| 009003s0vvvviiii | 1. Run the PCI Utility or the Micro Channel |
| (PCI device resource allocation | Change Configuration Utility to change |
| failure. No resource available | system resource allocation. |
| for the requested memory, I/O, | |
| or C0000-DFFFF ROM addr. space) | |
| 009004s0vvvviiii | 1. If S <> 0, replace the PCI adapter. |
| (PCI device ROM checksum | - or - |
| failure) | If S = 0, replace the system board. |
| 009005s0vvvviiii | 1. Remove the unsupported PCI adapter |
| (Unsupported PCI device) | |
| 009010s0vvvviiii | 1. If S <> 0, replace the PCI adapter. |
| (PCI data parity error) | - or - |
| If S = 0, replace the system board. | |
| 009011s0vvvviiii | 1. If S <> 0, replace the PCI adapter. |
| (PCI data parity error) | - or - |
| If S = 0, replace the system board. | |
| 009020s0vvvviiii | 1. If S <> 0, replace the PCI adapter. |
| (PCI addr. parity error) | - or - |
| If S = 0, replace the system board. | |
| 009030s0vvvviiii | 1. If S <> 0, replace the PCI adapter. |
| (PCI system error) | - or - |
| If S = 0, replace the system board. |
PCI Error Messages
| Error Message | FRU/Action |
|---|---|
| PCI device(s) removed | 1. One or more PCI add-in devices |
| since last power up: | appears to have been removed since |
| PCI vendor ID=xxxx, device | the last execution of POST |
| ID=xxxx previously in slot x | This could be due to a catastrophic |
| failure of the PCI device rather than its | |
| actual physical removal. | |
| PCI device(s) added | 1. One or more PCI add-in devices |
| since last power up: | appears to have been added since |
| PCI vendor ID=xxxx, device | the last execution of POST |
| ID=xxxx previously in slot x | It may have been moved from |
| another slot. This is not an error. | |
| The device was enabled and had resources assigned. | |
| Unable to assign requested | 1. A requested PCI resource (from the |
| resources: | PCI Device Configuration Block) could not |
| PCI vendor ID=xxxx, device | be assigned as requested due to a conflict |
| ID=xxxx in slot x | with a non-PCI device or to a conflict with |
| another requested PCI resource |
Please see the LEGAL - Trademark notice.
Feel free - send a 
for any BUG on this page found - Thank you.