 |
IBM-AUSTRIA - PC-HW-Support 30 Aug 1999 |
Stopping or Powering-Off the System
For Locations see > INDICATORS (Front View)
Stopping or Powering-Off the System
When the Start/Stop button is pressed, the service processor (SP) sends an interrupt causing the count-down timer to start.
When the timer reaches zero (0), the computer is powered-off. The default value for this timer is zero (0) seconds. The SP also
interrupts the host system through the SP or NMI interrupts if these features are enabled.
The SP will display a message on the LCD indicating that the computer will power-off in XX seconds. If enabled, this feature can be canceled
by pressing the Enter button.
More INFORMATION / HELP is available at the IBM-HelpCenter
Please see the LEGAL - Trademark notice.
Feel free - send a 
for any BUG on this page found - Thank you.