 |
IBM-AUSTRIA - PC-HW-Support 30 Aug 1999 |
Undetermined Failing Processor Diagnostics
Undetermined Failing Processor Diagnostics
If the diagnostics identified a processor failure on a multiprocessor
computer but could not identify which processor is failing (the FRU replacement is any processor in the
'Symptom-to-FRU Index', do the following:
- Power-off the computer and remove all of the installed processors.
- Reinstall one of the processors and run the diagnostics.
- If the processor is good, remove the good processor and follow this procedure for each processor
previously removed from the computer, until you locate the defective processor.
- When you locate the defective processor, replace it and reinstall the remaining processors you
removed from the computer.
More INFORMATION / HELP is available at the IBM-HelpCenter
Please see the LEGAL - Trademark notice.
Feel free - send a 
for any BUG on this page found - Thank you.