 |
IBM-AUSTRIA - PC-HW-Support 30 Aug 1999 |
Service Processor Requirements
Service Processor Requirements
The service processor (SP) follows the following rules for each power-on and -off cycle.
The following functions are complete at power-up. (See also 'Starting or Stopping the System')
- Because the SP runs continuosly in this version, an internal interrupt is generated each time the Start/Stop button
is pressed. This interrupt will set the Power-State bit in the RTC's SRAM and set the PAB bit to zero (0) turning on the power supply.
- At SP power-on, the RTC's Power-State bit is checked to determine if the system should stay powered-on after an AC power failure.
More INFORMATION / HELP is available at the IBM-HelpCenter
Please see the LEGAL - Trademark notice.
Feel free - send a 
for any BUG on this page found - Thank you.