IBM-AUSTRIA - PC-HW-Support    30 Aug 1999

Additional/Related Service Information

•  General Safety
•  Electrical Safety

•  Administration Monitoring Utilities
  •  RAID Technologie
  •  Hard Disk Drive Capacities
  •  Additional Storage Capacity
  •  The RAID Configuration Program Screens
  •  Performing Common Tasks
  •  Creating a Disk Array
  •  Defining Logical Drives
  •  Defining a Hot-Spare Drive
  •  Deleting a Disk Array
  •  RAID Diagnostic Error Codes

•  Obtaining Drive Status
•  Bay/Array Selection List
•  Blank Status
•  Results of a Hard Disk Drive Failure
•  Logical and Hard Disk Drive Status Indications
•  Replacing a Faulty Drive
•  Backing Up the Disk-Array Configuration
•  Restoring the Disk-Array Configuration
•  Using the Advanced Functions
•  Changing the write Policy
•  Formatting Drives
•  Changing the RAID Parameters

•  Termination Requirements
•  Cabling Requirements
•  Setting SCSI IDs for External Devices

•  ROM Address Jumper Setting
•  Termination (Hot-Swap Back Plane)

•  BIOS Startup Messages
•  Booting the Computer from a SCSI Drive
•  Computer Hangs, or HOST Adapter Cannot Always Find the Drives

•  Starting the SCSISelect Utility Program
•  SCSISelect Utility Program Options
  •  Configure/View Host Adapter Settings
  •  SCSI Controller Settings/Description
  •  SCSI Disk Utilities
  •  Using the Low -Level Format Program
  •  When to Use the Low-Level Format Program
  •  Starting the Low-Level Format Program

Please see the LEGAL  -  Trademark notice.
Feel free - send a   for any BUG on this page found - Thank you.