External SCSI Devices

^{IBM-AUSTRIA - PC-HW-Support 30 Aug 1999}

External SCSI Devices

External SCSI Devices

Termination Requirements
Cabling Requirements
Setting SCSI IDs for External Devices
Hot-Swap Backplane

NOTE: You cannot use both internal connectors on the SCSI-2 adapter and also use the external connector. For disk-array models with the SCSI-2 Fast/Wide PCI-Bus Adapter, you cannot use the internal channel 1 connector and the external connector at the same time. If you intend to use the external connector, connect internal SCSI-2 devices to the internal channel 2 connector. See the following figure.

More INFORMATION / HELP is available at the IBM-HelpCenter

Please see the LEGAL - Trademark notice.
Feel free - send a for any BUG on this page found - Thank you.