|
|
|
The architecture of the adapter and the architecture of the slot the
adapter is installed in must be the same. (Examples: An EISA adapter
must be installed in a EISA slot, and a Micro Channel adapter must be installed in
a Micro Channel slot.
| Network Adapter | Device Driver | LAN Server 4.0 MPTS |
|---|---|---|
| 3Com Token-Link III EISA | IBMTOKMP.OS2 | IBM SMP Token-Ring Network Adapter |
| 3Com EtherLink II 3C503-16 ISA | ELNKII.OS2 | 3Com 3C503 EtherLink II Adapter |
| 3Com EtherLink III EISA | ELNK3.OS2 | 3Com Etherlink III Family OS/2 |
| 3Com EtherLink III ISA | ELNK3.OS2 | 3Com Etherlink III Family OS/2 |
| IBM Token-Ring Network 16/4 ISA | IBMTOKMP.OS2 | IBM SMP Token-Ring Network Adapter |
| IBM Token-Ring 16/4 ISA-16 | IBMTOKMP.OS2 | IBM SMP Token-Ring Network Adapter |
| IBM LAN Adapter for Ethernet ISA | IBMENI.OS2 | IBM LAN Adapter for Ethernet |
| Intel® TokenExpress 16S ISA | OLITOK16.OS2 | Use the NDIS driver on the adapter diskette |
| Intel® EtherExpress 16C ISA | EXP16.OS2 | Intel® EtherExpress 16 Family |
| SMC EtherCard Elite 16 Ultra ISA | SMC8000.OS2 | Use the NDIS driver on the adapter diskette |
If OS/2 LAN Server provides a device driver for the network
adapter, use the table above to
determine the appropriate device driver to
select during the installation process. If OS/2 LAN Server
does not provide the device driver, use the NDIS device driver located on the
diskettes supplied with the adapter. (Check the adapter documentation
for installation instructions.)
Please see the LEGAL - Trademark notice.
Feel free - send a 
for any BUG on this page found - Thank you.