 |
IBM-AUSTRIA - PC-HW-Support 30 Aug 1999 |
Termination (for Multiple-Computer Configurations)
Termination (for Multiple-Computer Configurations)
If more than one computer is attached to the SCSI bus, you can configure the adapter to provide
termination when the adapter host computer is powerd off. The termination is applied only when the computer containing the adapter is powered off and another computer
connected to the SCSI bus accesses the device.
To activate this termination, install a jumper on J4 on the adapter.
More INFORMATION / HELP is available at the IBM-HelpCenter
Please see the LEGAL - Trademark notice.
Feel free - send a 
for any BUG on this page found - Thank you.