 |
IBM-AUSTRIA - PC-HW-Support 30 Aug 1999 |
Installing an Uninterruptible Power Supply
Installing an Uninterruptible Power Supply
A 9-pin, serial-port cable is supplied with the server. You can use
this cable to attach an American Power Conversion (APC) uninterruptible
power supply (UPS).
After the UPS is installed, the software support must be
loaded on the server. To do this:
- Start the main ServerGuide CD.
- Go to the Diskette Factory, then select POWERCHUTE
for NetFinity
- Follow the instructions on the screen to install the
POWERCHUTE for NetFinity software.
More INFORMATION / HELP is available at the IBM-HelpCenter
Please see the LEGAL - Trademark notice.
Feel free - send a 
for any BUG on this page found - Thank you.