Note:
For additional information about systems with the
4-Way Xeon™ Upgrade Kit installed, refer to the Netfinity 5500 M20 -
Type 8662 Hardware Maintenance Manual (Part Number 37L2020).
You can upgrade the Netfinity 5500 or Netfinity 5500 M10 server
with up to four Intel® Pentium® II Xeon™ microprocessors or up to four
Pentium® III Xeon™ microprocessors.
This Processor Upgrade Kit provides a new microprocessor assembly that
includes the processor board and three terminator cards.
It does not include the microprocessors, voltage regulator modules (VRMs),
or memory modules.
You must install at least one microprocessor kit.
Optionally, you can install up to four microprocessor kits.
(The microprocessor kits include the required VRMs.) You
must also install the memory-modules.
This book provides instructions for installing the Processor
Upgrade Kit. It also includes instructions for installing the
microprocessors, VRMs, and the memory-modules.
Important:
This Processor Upgrade Kit must be installed by
trained service personnel. Contact IBM or a trained
service provider for assistance.
Important:
Parts Listing (4-Way Upgrade Kit)
for any BUG on this page found - Thank you.