IBM-AUSTRIA - PC-HW-Support    30 Aug 1999

Required Companion Options

1.  You can install one to four microprocessor kits in the server.  To avoid damage and ensure proper server operation when you install  a new or an additional microprocessor, use microprocessors that have  the same cache size and type, and the same clock speed.

   Note:  If you are upgrading a Netfinity 5500 M10, the  server might come with one or more  microprocessors that are compatible with this  Processor Upgrade Kit.

2.  You can add memory modules to the server in any of the following configurations.
   •  128 MB registered SDRAM ECC DIMM
   •  256 MB registered SDRAM ECC DIMM
   •  512 MB registered SDRAM ECC DIMM
   •  A combination of the 128 MB, 256 MB, and 512 MB registered SDRAM ECC DIMMs

    For more information about the memory configurations supported,  see Installing memory-modules.

3.  Optionally, you can install a second 500-watt power supply for redundant power.
    With a redundant power supply installed, you can replace  a failing power supply without turning off the server.

Please see the LEGAL  -  Trademark notice.
Feel free - send a   for any BUG on this page found - Thank you.