 |
IBM-AUSTRIA - PC-HW-Support 30 Aug 1999 |
Before you begin
Before you begin
Read through these instructions to familiarize yourself with
the installation procedure. Be sure you have the additional
microprocessors and memory options required to complete
the upgrade (see 'Required Companion Options').
The option contains the following items:
- Processor housing assembly, consisting of:
- Processor housing
- Processor board
- Memory board
- Three terminator cards
- Fan Assembly
- Power supply
- Power supply handle
- Power backplane
- Power supply separator
- RS-485 interface cable
- Processor housing guide
- SCSI controller-to-bulkhead cable
- Front panel assembly
- Diagnostic panel assembly
- Air diffuser
- Half-card slot insulator
- Power supply filler panel
- Four blue thumbscrews
- Jumper extension cable
- IBM Netfinity 5500 M20 Advanced System Management Processor Firmware Update Diskette
- IBM Netfinity 5500 M20 BIOS Update Diskette
- IBM Netfinity 5500 M20 Diagnostic Update Diskette 1 of 2
- IBM Netfinity 5500 M20 Diagnostic Update Diskette 2 of 2
- IBM Netfinity Four-Way Processor Upgrade Kit Installation Instructions (this book)
- IBM Netfinity 5500 M20 Server Library, which includes the ServerGuide CDs
- IBM Netfinity 5500 M20 system service label
- Intel® microprocessor label
- Two upgrade stickers
Note:
The illustrations in this book might be slightly different
from the hardware.
Back to 
More INFORMATION / HELP is available at the IBM-HelpCenter
Please see the LEGAL - Trademark notice.
Feel free - send a 
for any BUG on this page found - Thank you.