IBM-AUSTRIA - PC-HW-Support    30 Aug 1999

Symptom-to-FRU Index (Netfinity 5500 (8660) and 5500-M10 (8661))

Note:

1.  Check the configuration before you replace a  FRU. Configuration problems can cause false  errors and symptoms.
2.  For IBM devices not supported by index, refer to  the manual for that device.

3. Always start with General Checkout.  

Error LED Indications 

•  Control Panel System Error LED
•  Power Supply LED Errors
•  System Board LEDs
•  System Board SCSI LEDs

•  Beep Symptoms
•  No Beep Symptoms
•  Error Symptoms
•  Undetermined Problems

•  POST Error Codes
•  Diagnostic Error Codes
•  SCSI Error Codes
•  ServeRAID II Controller Error Codes/Messages

The Symptom-to-FRU lists symptoms, errors, and the possible causes. The most likely cause is listed first. Use this Symptom-to-FRU Index to help you decide which FRUs to have available when servicing the computer.

The POST BIOS displaying POST error codes and messages on the screen.

Please see the LEGAL  -  Trademark notice.
Feel free - send a   for any BUG on this page found - Thank you.