|
|
|
| Error Code | FRU/Action |
|---|---|
| All SCSI Errors | 1. External SCSI devices must be powered-on |
| One or more of the following | before you power-on the server. |
| might be causing the | 2. The cables for all external SCSI devices |
| problem: | are connected correctly. |
| ° A failing SCSI device | 3. If you have attached an external SCSI |
| (adapter, drive, | device to the server, make sure the external |
| controller) | SCSI termination is set to automatic. |
| ° An improper SCSI | 4. The last device in each SCSI chain is |
| configuration or SCSI | terminated correctly. |
| termination jumper | 5. The SCSI devices are configured correctly. |
| setting | |
| ° Duplicate SCSI IDs in | |
| the same SCSI chain | |
| ° A missing or improperly | |
| installed SCSI | |
| terminator | |
| ° A defective SCSI | |
| terminator | |
| ° An improperly installed | |
| ° cable | |
| ° A defective cable |
Please see the LEGAL - Trademark notice.
Feel free - send a 
for any BUG on this page found - Thank you.