Back to Contents Page

Speakers

Dell™ Latitude™ X200 Service Manual


Removing the Speakers

NOTICE: Disconnect the computer and any attached devices from electrical outlets.
NOTICE: To avoid ESD, ground yourself by using a wrist grounding strap or by touching an unpainted metal surface on the computer.
NOTICE: Read "Preparing to Work Inside the Computer" before performing the following procedure.
  1. Remove the battery.

  2. Remove the keyboard.

  3. Remove the palm rest.

  4. Remove the M2 x 4-mm screw that secures the speaker to the bottom case.

NOTE: The left and right speakers are interchangeable.

1

system board connector
(1 per speaker)

2

speaker connector
(1 per speaker)

3

M2 x 4-mm screw
(1 per speaker)

4

speaker cable
(1 per speaker)

5

speakers (2)

NOTICE: Do not pull on the speaker cable. Pull from the speaker connector to disconnect the cable.
  1. Disconnect the speaker cable from the system board connector.

NOTICE: Handle the speakers with care to avoid damaging them.
  1. Remove the speaker by pulling it straight up and out of the bottom case.

Back to Contents Page