 |
IBM-AUSTRIA - PC-HW-Support 30 Aug 1999 |
Preinstallation Steps (All Bays) (Netfinity 7000 - 8651)
Preinstallation Steps (All Bays)
Before you install drives in the server, verify that you have
all the cables and any other equipment specified in the
documentation that comes with the internal drive. You
might also need to perform certain preinstallation activities.
Some of the steps are required only during the initial
installation of an option.
- Choose the bay in which you want to install the drive.
- Check the instructions that come with the drive to see
if you need to set any switches or jumpers on the drive.
- To install the drive, go to '5.25-Inch Removable-Media Drive' or
'Hot-Swap Drive Installation'.
More INFORMATION / HELP is available at the IBM-HelpCenter
Please see the LEGAL - Trademark notice.
Feel free - send a 
for any BUG on this page found - Thank you.