Return to MAIN-Index  Return to SUB-Index    IBM-AUSTRIA - PC-HW-Support    30 Aug 1999

Fan Asm (TP 240 - 2609)



Fan Asm


  -Warning- Do not apply pressure on the fan blades or hub assembly,
doing so can damage the fan bearings.


To remove the fan Asm:

  1.  Remove the two screws securing the fan Asm.
  2.  Carefully lift the fan Asm.
  3.  Disconnect the cable from the system board.
     

Step Size (Quantity) Head & Color Torque
1 M2.0 x 7 (2) Flat head, silver 2.0 kgf-cm


Note: Make sure you use the correct screw for replacement.

More INFORMATION / HELP is available at the  IBM-HelpCenter

Please see the LEGAL  -  Trademark notice.
Feel free - send a Email-NOTE  for any BUG on this page found - Thank you.