 |
IBM-AUSTRIA - PC-HW-Support 30 Aug 1999 |
Floppy drive format / busmaster
PROBLEM - Floppy drive failures on format and diskcopy commands when the system is
running with EMM386.SYS and a busmaster card installed.
Systems AFFECTED - Any Valuepoint system with a busmaster adapter running DOS 5.0
or above with EMM386 and device drivers required to initialize the adapter.
SOLUTION - A device driver called TERODMA.SYS can be downloaded from the IBM BBS.
Place the device driver first in CONFIG.SYS.
For Valuepoint systems 6382, 6384 and 6387 (models with flash EEPROM), a flash
update (level 51 or higher) diskette is available to eliminate this failure. The flash update
can be obtained from the IBM BBS.
Additional information - N/A
More INFORMATION / HELP is available at the IBM-HelpCenter
Please see the LEGAL - Trademark notice.
Feel free - send a 
for any BUG on this page found - Thank you.