|
|
|
Flickering and Incorrect Tint
+---+
|001|
+---+
- Do the auto setup (see the Installation and Operation Guide).
DOES THE PROBLEM STILL EXIST ?
+---+
Yes No-+002| The auto setup has been completed successfully.
+-+-+ +---+
|003|
+---+
- Adjust the PHASE value in the SUB MENU screen when screen flicker
exist.
DOES THE PROBLEM STILL EXIST ?
+---+
Yes No-+004| The phase adjustment has been completed successfully.
+-+-+ +---+
|005|
+---+
Reset all the video values to their default settings :
Pressing and holding the brightness arrow button and the contrast
arrow button at the same time, turn on the display.
The standby and the power indicator start blinking alternately, and
all the values are reset.
- Do the auto setup.
DOES THE PROBLEM STILL EXIST ?
+---+
Yes No-+006| The auto setup has been completed successfully.
+-+-+ +---+
|007|
+---+
Replace the main board.
If there is a slight vertical interference displayed every
four pixels after the main board is replaced, continue
at 'MAP 0140' Setting the screen.
Please see the LEGAL - Trademark notice.
Feel free - send a 
for any BUG on this page found - Thank you.