Return to MAIN-Index  Return to SUB-Index    IBM-AUSTRIA - PC-HW-Support    30 Aug 1999

Memory



Memory

After you add (or remove) extended memory, you must update the EISA Configuration Diskette.

NOTE: Not performing the following procedure could result in memory errors, and in the operating system not recognizing the added (or removed) memory.
  1.  Start the EISA Configuration Diskette  (see 'Starting the EISA Configuration Diskette').
  2.  Select Step 3: View or edit details.  The system information appears.
  3.  Under Advanced System Feature Setup, select Total System Memory.
  4.  Select the correct amount of memory, then press F10.

    NOTE:

     It is possible to install single-inline-memory-modules (SIMMs)  in combinations where the total amount of memory installed does not  appear on the memory configuration screen. In the unlikely event that  this occurs, select the next lower setting on the memory configuration  menu, and all of the installed memory will be supported on the server.

  5.  Return to the Main Menu, save the configuration,  and exit from the utility program.

More INFORMATION / HELP is available at the  IBM-HelpCenter

Please see the LEGAL  -  Trademark notice.
Feel free - send a Email-NOTE  for any BUG on this page found - Thank you.