Return to MAIN-Index  Return to SUB-Index    IBM-AUSTRIA - PC-HW-Support    30 Aug 1999

Starting the EISA Configuration Diskette



Starting the EISA Configuration Diskette

Using a backup copy of the EISA Configuration Diskette can prevent damage to the original diskette (see 'Backing Up the EISA Configuration Diskette').

To start the EISA Configuration Diskette, do the following:
  1.  Insert the EISA Configuration Diskette into the diskette drive.
  2.  Power-on the computer, or if it is already on,  shut down the operating system and restart the computer.
  3.  When the first screen appears, type CF and  press Enter.  Follow the instructions on the screen until the main menu, Steps in configuring the computer, appears.
  4.  Use the Up Arrow (  ) or Down Arrow (  ) key  to advance through the items on the screen.  Use the Tab key to select choices on the bottom of the screen.  Press the Esc key to return to a previous menu.
  5.  Press Enter to make a selection.
  6.  Follow the instructions on the screen to view or change (edit)  the configuration information.

    NOTE:   Adapters installed in the server  appear automatically on the EISA Configuration screens after  you copy  the adapter's configuration file (file with an  extension of .CFG ) to the  EISA Configuration Diskette.  If you want to manually add an  adapter that you have not yet installed in the server,  add it using  Step 2 from the menu.  To configure ISA adapters, follow the instructions on the screen.

Back to  Jump to TOP-of-PAGE
More INFORMATION / HELP is available at the  IBM-HelpCenter

Please see the LEGAL  -  Trademark notice.
Feel free - send a Email-NOTE  for any BUG on this page found - Thank you.