|
|
|
Changing the Software Configuration Setup:
The best way to resolve memory-address conflicts is to change the software configuration by
changing the addresses that the EMS device driver defined.
The SVGA video memory occupies 32 Kb (1 Kb = approximately 1000 bits) of space in the hex
C0000 to C7FFF EMS memory area.
EMS device drivers must use addresses different from those assigned to video read-only memory (ROM).
You can use the Configuration/Setup Utility program to view or change the current setting for video ROM.
For information about using the Configuration/Setup Utility program, see
'Using the Configuration/Setup Utility Main Menu'.
Changing the Hardware Configuration Setup:
An alternative way to resolve memory-address conflicts is to change the address of the conflicting
hardware option.
Please see the LEGAL - Trademark notice.
Feel free - send a 
for any BUG on this page found - Thank you.