Return to MAIN-Index  Return to SUB-Index    IBM-AUSTRIA - PC-HW-Support    30 Aug 1999

Power Backplane Removal



Power Backplane Removal

Before you begin: Read 'Safety Information'.


To remove the power backplane, do the following:

  1.  Remove the top cover (see 'Top Cover Removal').
  2.  To access the power backplane cables, slide the  shuttle to the rear of the system, see 'Shuttle Removal'.
  3.  Disconnect the power backplane cables.
  4.  Remove the power backplane cover.
     
    1.  Remove the power backplane cover screws -1-.
       
    2.  Remove the power backplane cover screws -1-,  then, remove the power backplane cover.

  5.  Remove the power backplane.
     
    1.  Remove the power backplane screws -1-, then,  remove the power backplane.

More INFORMATION / HELP is available at the  IBM-HelpCenter

Please see the LEGAL  -  Trademark notice.
Feel free - send a Email-NOTE  for any BUG on this page found - Thank you.