 |
IBM-AUSTRIA - PC-HW-Support 30 Aug 1999 |
Installing Devices (NetBAY3) on Side Rails
Installing Devices (NetBAY3) on Side Rails
Installing devices that sit on side rails in a NetBAY3 is similar to
installing these devices in a rack enclosure. The device
side rails must be screwed to the NetBAY3 vertical
mounting rails. Follow the instructions in the
documentation that comes with the device and use the
following illustrations as a guide.
If you need to remove or move the cage nuts at the rear of
the NetBAY3 to hold the rails, go to 'Removing Cage Nuts'.
More INFORMATION / HELP is available at the IBM-HelpCenter
Please see the LEGAL - Trademark notice.
Feel free - send a 
for any BUG on this page found - Thank you.