|
|
|
| Item | Description |
|---|---|
| Port to configure | Port to configure Use the spin buttons to select the number of the port |
| that your modem is configured to use. This spin | |
| button will show only values that are available for use | |
| by your Advanced Systems Management Adapter. | |
| Baud rate Use the spin buttons to specify the the baud rate of | |
| the modem. | |
| Initialization | Type the initialization string that will be used for the |
| string | specified modem. A default string is provided (ATE0). |
| Do not change this string unless your dialout functions | |
| are not working properly. If you need to change the | |
| initialization string, see 'Initialization String Guidelines'. | |
| Caller ID string | This field is not used. |
| Port selected | This check box indicates whether the port number |
| currently displayed in the Port to configure field is | |
| the port that is currently designated for use by the | |
| Advanced Systems Management Adapter. Check this | |
| check box if you want to configure the Service | |
| Processor to use the currently displayed port number. | |
| Null modem | Null modem Check this check box to use a null modem connection |
| to allow access from a remote Netfinity system. | |
| Note: If the Null Modem checkbox is checked you | |
| cannot send dialout alerts to other systems | |
| using a modem or receive dialout alerts from | |
| other systems. |
Please see the LEGAL - Trademark notice.
Feel free - send a 
for any BUG on this page found - Thank you.