 |
IBM-AUSTRIA - PC-HW-Support 30 Aug 1999 |
Initialization String Guidelines
Initialization String Guidelines
If you need to provide a new initialization string, refer to the user's
guide that came with your modem. Your initialization string must
contain commands that configure your modem as follows:
- Command echoing OFF
- Online character echoing OFF
- Result codes ENABLED
- Verbal result codes ENABLED
- All codes and Connect messages with BUSY and DT detection
- Protocol identifiers added - LAPM/MNP/NONE V42bis/MNP5
- Normal CD operations
- DTR ON-OFF hang-up, disable AA and return to command mode
- CTS hardware flow control
- RTS control of receive data to computer
- Queued and nondestructive break, no escape state
More INFORMATION / HELP is available at the IBM-HelpCenter
Please see the LEGAL - Trademark notice.
Feel free - send a 
for any BUG on this page found - Thank you.