Symptom-to-FRU Index (SCSI Test

^{IBM-AUSTRIA - PC-HW-Support 30 Aug 1999}

Symptom-to-FRU Index (SCSI Test - Adaptec)

Symptom-to-FRU Index Adaptec

This Symptom-to-FRU Index lists possible causes and actions for error messages and sense errors you may receive using the SCSI Tests (Adaptec) Diskette. If more than one possable cause or action is listed, the most likely cause is listed first.

Error Message	Action

Insufficient memory to allocate	Not enough conventional memory available.
data buffer. Program Terminated
Insufficient memory for help file	Not enough convential memory.

Invalid command line argument	Invalid command-line parameter, type ASDA/H for
specified.	available parameters.

Insufficient memory to allocate	Not enough conventional memory available.

Unable to open ASPI Manager!	Check to see if ASPI Manager has been loaded correctly

Invalid command	Invalid SCSI command.

Device is not returning a	If a removal device is installed, make sure the
MEDIA CAPACITY	media is inserted.

Format unit	Check the defect list of the drive and do
	a low level format.

Test Unit Ready	Device not ready. Check cabling and functionally
	the drive

Rezero / Rewind Unit	Unable to complete tape rewind, check media or drive

Custom SCSI Command	Illegal command

Request sense	Device is reporting an illegal sense code.

Read Block	None

Write Block	None

Erase Tape	Trouble erasing tape, check media or tape heads.

/Load / Unload Unit	Tape stuck or device does not support this function.

See Error Codes (Adaptec)

More INFORMATION / HELP is available at the IBM-HelpCenter

Please see the LEGAL - Trademark notice.
Feel free - send a for any BUG on this page found - Thank you.