|
|
|
Selecting a Test (Standard Mode) Adaptec
| Device | Test |
|---|---|
| SCSI Hard Disk Drives | 0 - Device Diagnostics 1 - Test Unit Ready 2 - Get Device Status 3 - Read Test 4 - Read / Write Test |
| SCSI CD-ROM Drives | 0 - Device Diagnostics 1 - Test Unit Ready 2 - Get Device Status 3 - Read Test |
| SCSI Tape Drive | 0 - Device Diagnostics 1 - Test Unit Ready 2 - Get Device Status |
Test Descriptions (Standard Mode)
| Test | Description |
|---|---|
| Device Diagnostics |
Sends a command requesting the SCSI device to perform a self diagnostics. The status indicator will display busy during the test. When the test is complete a message stating whether the test were completed successfully or unsuccessfully. |
| Test Unit Ready | Sends a SCSI Test Unit Ready command to the device and will indicate if the device is ready or not. |
| Get Device Status |
Displays the status of the last command sent to the device and is displayed as: - Device sense key status: 00 - (NO SENSE ERROR) A non zero value indicates an error. See 'Symptom-to-FRU Index (SCSI Test - Adaptec)' |
| Read Test | Reads the entire media of the SCSI device. A status bar showing the test progress is displayed during the test. A message is displayed when the test completes successfully or an error occurs. |
| Read / Write Test |
Attention This test will destroy all data on the device. Issues a write command and then a read command to verify the integrity on the device. |
Please see the LEGAL - Trademark notice.
Feel free - send a 
for any BUG on this page found - Thank you.