IBM-AUSTRIA - PC-HW-Support    30 Aug 1999

Configuration/Setup Utility ISA Legacy Resources

1.  Restart the system and run the Configuration/Setup Utility.
2.  Select the ISA Legacy Resources option.
3.  Select I/O Port Resources.
4.  Refer to the list in the 'table' and 'Configuration Considerations' and reserve I/O addresses for the adapter ports.
5.  Enter the reserved I/O addresses on the 'Configuration Data Worksheet'.
6.  Select Interrupt Resources.
7.  Refer to the list in the 'table', and reserve interrupts for the adapter service  processor port and the two adapter COM ports.
8.  Enter the reserved interrupts on the 'Configuration Data Worksheet'.
9.  Follow the on-screen prompts to exit the Configuration/Setup Utility.

Please see the LEGAL  -  Trademark notice.
Feel free - send a   for any BUG on this page found - Thank you.