 |
IBM-AUSTRIA - PC-HW-Support 30 Aug 1999 |
Module Testing Mode
Module Testing Mode
If the test programs do not find a problem, or you want to perform
in-depth testing, the Module Testing mode provides a method to run
individual tests on a single module.
For example, you can run an individual test for the diskette
drive, or you can run groups of tests for several modules.
In the Module Testing mode, you can define how many times each test should
run and how the test program should log the errors.
To start the Module Testing mode:
- Start the diagnostics diskette. See 'Starting the QAPlus/PRO Diagnostics Diskette'.
- Select Diagnostic from the Main Menu.
- Select Module Tests from the next menu.
- Use the up and down arrow keys (
and 
)
to move the highlight bar from one selection to the next.
- Follow the instructions on the screen.
NOTE:
As you scroll down the selection menu, the Test Group window to the right
changes to correspond to the highlighted Module.
More INFORMATION / HELP is available at the IBM-HelpCenter
Please see the LEGAL - Trademark notice.
Feel free - send a 
for any BUG on this page found - Thank you.