 |
IBM-AUSTRIA - PC-HW-Support 30 Aug 1999 |
Error Reporting P/390 (8641-S/390)
Error Reporting (P/390)
The S/390 Microprocessor Complex uses the following methods of error reporting.
- POST Error 165 (configuration)
If this error is displayed and the P/390 card does not appear
on the installed devices list, it is an indicationthat one or more of the following
problems exist:
- Missing or bad .ADF or .DGS files
- Missing or incorrect statement in the config.sys file. (The statement for the P/390 should be the
last line in the config.sys file.)
- Dialog Box (Machine Check Errors)
If an error is detected during or after initialization of the P390 card, a Dialog Box with a Machine Check errir is displayed.
If this occurs, run the P/390 Diagnose and Option diskette. For a list of common Machine Check errors, see
'Machine Check Error Messages'.
- AWS Error Log
Contains ASKI test information about failures that occured during operation.
Located in the P390 subdirectory on the hard disk drive (path = C:\P390\AWSERROR.LOG), this file can be
edited with a text editor.
More INFORMATION / HELP is available at the IBM-HelpCenter
Please see the LEGAL - Trademark notice.
Feel free - send a 
for any BUG on this page found - Thank you.