S/390 Machine Check Error Messages

^{IBM-AUSTRIA - PC-HW-Support 30 Aug 1999}

S/390 Machine Check Error Messages

S/390 Machine Check Error Messages (Type 8641)

NOTE: The diagnostic and error reporting programs may refer to the P/390 as a P/370.

If an error is detected during or after the P/390 card is initialized, a dialog box containing a Machine Check error is displayed on the screen. This error may be caused by one or more of the following:

Missing or bad .ADF or .DGS files
Missing or incorrect statement in the config.sys file (The statement for the P/390 should be the last line in the config.sys file.)
Missing or incorrect code on the P/390 card
Defective hardware
The following is a list of common machine check errors.
Can't open/find $s file. RC=$d2
Control Store Parity Error. Try END P/370 and IPL again.
Uncorrectable memory error at '$s'x (daughter card) code=$s
No status available
PS/2 used invalid S/370 address code= $s fic=$s addr=$s
Internal use of invalid S/370 address. code= $s fic= $s addr= $s
code = '$s'x, fic= $s addr= '$s'x

More INFORMATION / HELP is available at the IBM-HelpCenter

Please see the LEGAL - Trademark notice.
Feel free - send a for any BUG on this page found - Thank you.