BIOS Revision History

Remarks

Checksum: 4600                   Date:02/23/05

1. Initial release

Checksum: EC00                   Date:03/30/05
1.Remove USB device Connect / Disconnect wake function.
2.Adjust "USB DEV Wake up" item default value to disabled.

Checksum: EA00                   Date:05/18/05
1.Update BIOS code for K8 X2 CPU.

2.Adjust "Boot up Floppy seek" item default value to disabled.
2.Adjust "1T/2T memory Timing" on fail-safe defaults to "2T" and optimized defaults to "1T".

Checksum: C000                   Date:05/30/05
1.Fixed Cool'N'Quiet function fail.

2.Fixed some HD can not be detected when enabled SATA RAID mode.

Checksum: 5000                   Date:06/20/05
1.Show DRAM CL & timing on POST screen.
2.Fixed IDE 80 cable error on POST screen.
3.Fixed HD would not run at UDMA mode under Win2K.
4.Update Cool'N'Quiet PST table.
5.Adjused "1T/2T memory Timing" default value to "2T".

Checksum: 0600                   Date:08/01/05
1.Updated VGA BIOS to VER008.035I.000.
2.Fixed "LDT configuration" could not enable.
3.Updated ULi SATA RAID BIOS to V1.13

Checksum: 4B00                   Date:09/09/05
1.Update Cool'N'Quiet PST table.
2.Update PXE ROM for Broadcom 5789 Lan chip support.

Checksum: 0E00                   Date:11/03/05
1. Update CPU microcode.

Checksum: 8300                   Date:02/14/06
1. Add FX60 CPU support.

2. Update Cool'N'Quiet PST table.

Checksum: AC00                   Date:05/25/06
1. Update new Shuttle logo.

2. Fixed cannot use with Areca ARC-1220 PCI-E x8 RAID CARD.