ATI RS300 (Radeon 9100IGP) chipset (9100IGP + ATI-SB South bridge, Socket 478) 
microATX Motherboard

Award BIOS


A0316_1.BIN 	BIOS for (9100IGP + ATI-SB South Bridge + ITE IO Chip) 
		*** with Hardware Monitor 
		*** with STR (Suspend-To-RAM)
		*** PCB Ver. 01	(no Chasis-Open Detect/Alarm)
		

A0316_2.BIN	BIOS for (9100IGP + ATI-SB South Bridge + ITE IO Chip) 
		*** with Hardware Monitor 
		*** with STR (Suspend-To-RAM)
		*** PCB Ver.02 (with Chasis-Open Detect/Alarm) 
		


.4MBit Flash
.Oct/2003 built core
.Initial mass production release
.For first PCB (Ver. 01), no Chasis-Open Detect/Alarm function
(Oct/2003)

.4MBit Flash
.Added feature for the PCB Ver.02
.For second PCB (Ver. 02), with Chasis-Open Detect/Alarm function
(Nov/2003)

.4MBit Flash
.For second PCB (Ver. 02), with Chasis-Open Detect/Alarm function
.Added CMOS "Memory Enhancement" for improvement of RAM performance
(Nov/2003)

.4MBit Flash
.Dec/2003 updated core
.Added CMOS Setup : RAM "16 Load Full Speed" setting
.Added POST Screen : show "128-Bit" for Dual-Channel RAM access  
.Corrected DMICFG.EXE issue (sometime "no DMI Structure")
.Corrected issue (sometime unable to resume from S3)
(Dec/2003)

.4MBit Flash
.Feb/2004 updated core
.Updated the VGA portion of BIOS, fixed screen corruption in Multi-media file playback
.Added CMOS RAM control - option to limit to "DDR-333" maximum 
(Feb/2004)

.4MBit Flash
.End/Feb/2004 updated core
.Added support for intel "Prescott" CPUs
.Added "SurroundView" function for multi-display with add-on Radeon AGP Card 
(End/Feb/2004)

.4MBit Flash
.March/2004 updated
.Rebuilt the CMOS option "Limited DRAM Frequency" (limit to DDR-333)
.Corrected the garbage "default content" of  BIOSLOCK-String on previous BIOS
(March/2004)

.4MBit Flash
.Mid/March/2004 updated
.Updated CPU microcode support table
(Mid/March/2004)



Remark :
=======
1) Please identify the PCB Versions (01/02), before picking the BIOS file to match to the exact hardware.  The PCB Ver.02 (with Chasis-Open Detect/Alarm) carries the connector JP12, near the on-board speaker at the left edge of the PCB.

2) Due to a change in the "default content" of the BIOSLOCK-String, the error message " Program file's BIOS Lock String does not match with your system" may be shown when trying to upgrade BIOS from a previous version.  If this is the case, please add the extra software switch [/F] when using the Phoenix / Award Flash Upgrade Tool (AWDFLASH.EXE).  This will skip the comparison of BIOS-Lock String.  That is :
-> AWDFLASH  xxxxxxx.BIN /F