ATI RS300 (Radeon 9100IGP) chipset (9100IGP + ATI-SB South bridge, Socket 478) 
ATX Motherboard

Award BIOS


A0408IAG.BIN 	BIOS for (IGP340 + ATI-SB South Bridge + ITE IO Chip) 
		*** with Hardware Monitor 
		*** with STR (Suspend-To-RAM)
		

.4MBit Flash
.Nov/2003 built core
.Initial Mass Production Release
(Nov/2003)

.4MBit Flash
.Dec/2003 updated core
.Added CMOS Setup : RAM "16 Load Full Speed" setting
.Added POST Screen : show "128-Bit" for Dual-Channel RAM access  
.Corrected DMICFG.EXE issue (sometime "no DMI Structure")
.Corrected issue (sometime unable to resume from S3)
(Dec/2003)

.4MBit Flash
.Feb/2004 updated core
.Updated the VGA portion of BIOS, fixed screen corruption in Multi-media file playback
.Added CMOS RAM control - option to limit to "DDR-333" maximum 
(Feb/2004)

.4MBit Flash
.April/2004 updated core
.Added support for intel "Prescott" CPUs
.Added "SurroundView" function for multi-display with add-on Radeon AGP Card
(April/2004)


Remark :
=======
Due to a change in the internal BIOS ID number on the April/2004 built, the AWDFLASH.EXE tool may show the warning message "BIOS Part Number not match......", and may refuse to proceed.  Please add the extra software switch [/F] when updating the BIOS from an earlier version.  That is :

AWDFLASH xxxxx.BIN /F

This extra software switch will skip the checking of BIOS ID, and will proceed directly to write new content into the Flash IC.