Release by RIOWORKS 
   Product name: RIOWORKS SDVIA-L2R mainboard    
   BIOS version: 1.10
   Release Date: 05/14/2000
   Checksum:3EE5H
----------------------From BIOS Rev 1.00 to Rev 1.10 (Official Release)-------------------------
	1. Add PCI IRQ Selectable item in BIOS Setup Menu
	2. Add Memory Interleave
	3. Display System Thermal in BIOS Setup Menu
	4. Modify Chassis Intrusion function
	5. (694x+64h~67h) set to 02h due to the Winbond 256MB DIMM boot failed 
	6. Modify PCI IRQ Selectable item
	7. Modify DMI information
	8. Update firmware of onboard AMI IDE RAID V2.4.10241531A
	9. Add 'SDRAM Bank Interleave' option item in BIOS Setup Menu
   	10. Modify 694x+71h from e9h to e8h to fix AMI IDE RAID Card no show firmware
	11. Implement Register DRAM can't boot if CPU FSB is 66MHz
	12. Add "PCI Latency Timer" option item in BIOS Setup Menu
	13. Modify 694x Device1 offset 40 from CBh to C8h to fix DV Capture Car issue
	14. Update firmware V2.5.02112205A of onboard AMI RAID Controller
  	15. Modify ECC setting in BIOS Setup Menu
	16. Fix 'state after power failure'function in BIOS Setup Menu.
	17. Add CPU ratio X8.5 to Support 1.13GHz CPU
	18. Update CPU microcode
	




----------------------------------------------------------------------;;