Release by RIOWORKS 
   Product name: RIOWORKS SDVIA-100 mainboard    
   BIOS version: 1.12
   Release Date: 05/14/2000
   Checksum:3EC4H
   
-----------------------From BIOS Rev 1.00 to Rev 1.12 (Service BIOS)-------------------------
	1. Change default of "State after power-loss" from "ON" to "OFF"
	2. Change default of "WOL" & "WOM" from "Disable" to "Enable"
	3. Modify DMI information (SLOT, CPU information) 
	4. Remove 8bios.bin
	5. Fix "The system found new device after wake up from S1 under Win2K"
	6. Modify the the CPU display strings("Pentium III" -> "PIII", "Pentium 4" -> "P4") 
	7. Implement SCSI HDD may format error (Modify register of 694x+70h (0feh -> 04ah))
	8. Add a table for fixing CD-Pro AutoRun under Win98
	9. Add "PCI IRQ Selectable" item in BIOS Setup Menu
	10. Remove 'E','B' in CPU display string  
	11. Implement 'WOL', 'WOM' function
	12. Modify the BIOS code to reduce boot time when ECC enable
	13. Implement some Registered DRAM may not to boot if CPU FSB is 66MHz
	14. Implement Canopus DV Capture Cards.
	15. Implement Change 694x+71h from e9h to e8h to fix AMI IDE RAID Card no show firmware
	16. Add "PCI Latency Timer" option item in BIOS Setup Menu
	17. Update CPU microcode for D0-stepping CuMine CPU
	18. Add CPU ratio 'x 8.5' for CPU above 1.13GHz


----------------------------------------------------------------------;;