PDPLA

3.20 01/29/2003
  1. Added "FreeBSD OS Workaround" setup item in setup menu.
     This is used for fixed FreeBSD OS with smp
	 kernel booting will hang issue.
	 
	 User can select "FreeBSD OS Workaround"->"Enabled"
	 when they have FreeBSD OS with smp kernel to boot.
   2. Fix no Keyboard/Mouse boot issue.
	 
V3.10 01/24/2003
  1. Added security feature support for IWILL project.

V3.00
  1. Fix can't boot from USB FDD issue.
  2. change jack tech default set to enable. -C300 
  
V2.90
  1. Fixed press CTRL+A can't into ZCR bios setup menu with riser card. -C290 
  2. Added AC Power Lost feature in bios setup menu. -C290
  
V2.80
  1. Fixed Power cycle testing failed.
  2. Fixed Jackson Technplpgy can't be disables in OS.
   
V2.70
  1. Fixed memory sizing speed will become slow over 4GB issue.

V2.60
  1. Fixed memory sizing speed.
  2. Fixed jack teck can't disabled issue.

V2.50
  1. with BIOS FOR PDPLA 2 files: pdpla250.npl(for no riser card), pdpla250.rpl(for riser card).
  2. with BIOS FOR IWILL 2 files: pdpla250.niw(for no riser card), pdpla250.riw(for riser card).
  3. For IWILL BIOS, removed console redirection for clean room to build BIOS.
  4. For all, removed COMB device in the bios configuration.
  5. For all, fixed LPT2 will show in W2K standard mode.
  6. Attention please that PDPLA not support Win 98 OS, so if user setup Win 98 OS, there is no responsability
     for whom can setup properly and run it at the PDPLA motherboard.

V2.40
  1. Remark PC Health.

V2.30 
  Based on V2.22 ROM file and rename it to V2.30, no any other change be done
  with them.

V2.22
  1. Fixed Alarm on time work ok after W2k shutdown.
  2. Fixed Bug ID #PDPLA003, now can boot from Novell Netware 5.0 CD.
  3. Added Resume on modem ring function support.

V2.21
  1. Added PXE support.
  2. Added PME wake up support.
  3. Added Alarm on time support.
  4. Added Clear Cmos support.
  5. Added PC Health support.
  6. Added Instant Off support.
  7. Added OnBoard VGA En/Dis support.
  8. Added OnBoard Lan 82544 En/Dis support.
  9. Added OnBoard Lan 82550 En/Dis support.
  10. Added bios init date set to 01/01/2001 support.  

V2.20
  Based on V2.11 ROM and rename it to V2.20, no any other change be done
  with them.

V2.11
  Fixed ZCR card will cause system can't boot normally issue. 

V2.10
  Fixed NT4 installation load driver form floppy will cause problem issue.
  
V2.00
  Fixed p64h2 slot with pro100s lan card will cause ! mark issue.

V1.04 checksum please see checksum.txt
  1. Fixeded OnBoard SCSI can't be disabled in no riser card version bios.
  2. Fixeded memtest.exe testing will failed issue.

V1.03 checksum please see checksum.txt
  1. Fixed FreeBSD 4.5 mp kernel will panic issue.
  2. Modify Large disk access mode load default set to DOS.

V1.02 checksum please see checksum.txt
  1. Fixed SIO use NS366, this can fixed LPT setup menu default set to enable will
     cause resource conflict problem.
  2. Fixed For Riser Card version when boot SCSI HD under RED HAT 7.2 OS, will get
     timeout issue.
  3. Flash tool please use plash6.exe with command "phlash6 /mode=3 pdplaxxx.xxx".
	  	 
V1.01 checksum please see checksum.txt.
  1. Based on phoenix bios version 1.13, added all the features that pdpla097.xxx had.
  2. Added Flash part to support "SST49LF004A".
  3. Fixed pci routing table to solve SCSI hd will time out when booting  REDHAT 7.2.
  4. That's all.
V1.00 checksum please see checksum.txt.
  Final version of pdpla bios for old version kernel.   

V0.97 checksum please see checksum.txt
  1. Added function For supporting BMC.
  2. Fixed some default cmos setting for load optimal default in setup menu.
  3. Some bugs still hard working to trace.
  
V0.96 checksum please see checksum.txt
  missing info.   
V0.95 checksum please see checksum.txt
  missing info.
  
V0.94 checksum see checksum.txt.
  1. Fixed On Board SCSI Disabled function support,
     it is mainly to fix Bug ID: PDPLA021.
	 (p64h2.asm).                                                   
  2. That's all.

V0.93 checksum see checksum.txt.
  1. Added On Board SCSI menu item. (p64h2.asm & template.asm & scsi*.asm).
  2. Fixed For No Riser Card version BIOS can't see 6GB memory issue.
  3. That's all.
  
V0.92
  0. Bios pdpla092.rph (checksum:0484 19B5)is for rise card, 
     pdpla092.nph (checksum:0484 71E6) is for no riser card. 
  1. Support DDR ram sizing up to 6GB. (bcp.asm).
  2. Fixed event log no function issue. (bcp.asm).
  3. Fixed com port B support. (template.asm & k_canyon.asl).
  4. Fixed acpi routing table support W2K ok. (k_canyon.asl & pcioem.asm). 

V0.91
  1. Based on kernal V1.19 codebase, run W2k ok.
  2. pdpla091.wph is for riser card use, checksum:0483 FDD4. (pa.bat)
     pdplx091.wph is for no riser card use, checksum:0483 BCB1. (pb.bat)
  3. Bios software engineer: david.

V0.90  03/08/2002  Checksum
  1. Based on Arok14