Release Notification				          Filename:CL51RELS.TXT
*******************************************************************************
DCL51 ALL-BIOS release                                               06/11/2004

*File name : CL51210a.rom (V2.10)
*Checksum  : F4CF

SYS:
        Modify:
        1.Complet SpeedStep functions for Dothan.

        Add:
        1.Add microcode for Dothan B1 stepping.

EC:
        Modify:
	1: Remove AC_OFF event of BATT_UVP from AD channel.
	2: Modify BATT_UVP's protection from AD channel:
	   Old : Turn off system if detect voltage <= 12V from AD channel
	   New : Turn off system if system at discharge mode and detect
		 voltage <= 11.6V from AD channel during 2 seconds.
	3: If full condition of battery from SMBus is set but voltage from
	   SMBus is <=16.2V, EC will recharge battery 1 hr.

*******************************************************************************
DCL51 ALL-BIOS release                                               02/23/2004

*File name : CL51201a.rom (V2.01)
*Checksum  : 2809

SYS:
        Modify:
        1.Support Celeron M CPU
EC:
        Base on K3ax200a.rom
*******************************************************************************
DCL51 ALL-BIOS release                                               01/19/2004

*File name : CL51200A.ROM (V2.00)
*Checksum  : 9538

SYS:
        Fix:
        1. Some format CD can't boot issue.
        2. Some customer Re-covery Win2000 CD can't install issue.

        Add:
        1. Intel Wireless Lan 802.11b+g ID
        2. Askey a+g Wireless Lan ID
        3. Impletment Dothan CPU microcode and speed step tables .

EC:
   	Renamed from K3AX120A.ROM
*******************************************************************************
DCL51 ALL-BIOS release                                               08/28/2003

*File name : CL51120A.ROM (V1.20)
*Checksum  : F435

SYS:
        Fix:
          1. When system show OSB LOGO it will cause one line of garbage be show
             on the left-down screen .
EC:
   	Renamed from K3AX110A.ROM
*******************************************************************************
DCL51 ALL-BIOS release                                               08/14/2003

*File name : CL51110A.ROM (V1.10)
*Checksum  : 5D16

SYS:
        Fix:
          1. Win2000 HCT ACPI verify test have
             "Error:Could not evaluate \_SB_.PCI0.LPC0.BAT1._BIF" message.
          2. system will show ACPI warning message when HDD partition was changed.
EC:
   	Renamed from K3AX100A.ROM
*******************************************************************************
DCL51 ALL-BIOS release                                               07/03/2003

*File name : CL51100A.ROM (V1.00)
*Checksum  : 6501

SYS:
        Fix:
          1. Fix with plug the PCMCIA ATA card,the screen appears white image from the syandby
          2. Fix battery not show full when cold boot & restart into OS
        Modify:
          1. Enhance system boot speed
EC:
        Modify:
          1: Removed hotkey function of Fn+F4 and Fn+F6~9.
*******************************************************************************
DCL51 ALL-BIOS release                                               06/30/2003

*File name : CL51011A.ROM (V0.11)
*Checksum  : A397

SYS:
        Fix:
          1. HCT acpi verify test will blue screen and can't use HDD
          2. IOMP cause can't boot form PXE LAN
	  3. Bluetooth S4 resume can detect .
          4. Can't currect boot when S3 shut down
        Modify:
          1. remove UUID string of SCU
          2. Modify "Fn+F5" display sequence for spec
             A. LCD,LCD+CRT,CRT,CLD+TV,TV
             B. LCD,CRT,LCD+CRT
             C. LCD,TV,LCD+TV
          3. Modify Intel OSB logo .
EC:
        Base on   : K3AX010A.ROM
*******************************************************************************
DCL51 ALL-BIOS release                                               06/23/2003

*File name : CL51010A.ROM (V0.10)
*Checksum  : FCDD

SYS:
        Fix:
          1: J1 short loss message "press F1 continue,press F2 in setup"
          2: Clear J1 pin with AC pluged will cause system can't power on.
          3: 855PM can't display Centrino
          4. Before show post logo have garbage
        Modify:
          1: CPU type string of SCU
          2. Wireless Lan IRQ from 4 to 10
          3. change VGA Bios from 2834 to 2973
        Add:
          1: Help String of under Boot Menu
EC:
        Fix:
	1: Modify when Dritek driver loaded, EC will issues scancode to driver
           based on killswitch state.
	2: Modify thermal shutdown temperature to 99C.
	3: Modify read fan's RPM from 2 pulses to 4 pulses.
        Add:
	1: Add AdaptorErrBeep(): when wrong power adapter plug-in, beep alarm
	   every 2 seconds and flash system status LED and battery status LED 500 ms
	   every 1 second until adapter plug-out or system off.
*******************************************************************************
DCL51 ALL-BIOS release                                               06/13/2003

*File name : CL51009A.ROM (V0.09)
*Checksum  : 77A8

SYS:
        Fix:
          1. Memory size information error under OS             #BC014
          2. []boot system of Supervisor password can't work
          3. USB Floppy can't HOT Plug under DOS mode
          4. AUTO DIM function can't work
          5. PXE BOOT from lan function can't work
        Modify:
          1. Serial number and AssetTag string of SCU
EC:
        Fix:
          1: Modify the thermal handling routine.
	  2: Modify when battery at LB state, Green LED on 250ms every 500ms
	        and when battery at LLB state, Green LED on 100ms every 200ms.
          3: Adjust DAC value of panel.
        Add:
          1: Add Auto-DIM: LCD Brightness decrease 1 level when AC plug-out
	  	           LCD Brightness increase 1 level when AC plug-in
*******************************************************************************
DCL51 ALL-BIOS release                                               06/09/2003

*File name : CL51008A.ROM (V0.08)
*Checksum  : 7E4D

SYS:
        Fix:
          1. Battery Meter detailed information show not correct message #BC025
          2. AMIDIAG can't run on DCL51 unit                             #BC073
          3. "Fn+F5" can't TV out

        Modify:
          1. Wireless Lan IRQ
          2. VGA Memory to 16 MB

        Add:
          1. Detect Bluetooth Function
          2. IOMP[Instant On Media Player] Function
EC:
        Fix:
          1: Corrert RFOFF#(Low active) to RFOFF(High active).

        Modify:
	  1: Change WL_BT_LED to WL_LED and BT_LED.
             WirelessLan device exist and enable(WL_LED ON)
	     BlueTooth device exist and enable(BT_LED ON)
          2: Modify fast charge current :
		Iref=3.1V (HEX=F0) for 8 cells battery
		Iref=1.55V (HEX=78) for 4 cells battery
	  3: Modify system power led:
	        Green on: system at on mode
	        Green blinking: system at standby mode

        Add:
          1: Add Instant On Media Player.
*******************************************************************************
DCL51 ALL-BIOS release                                               05/30/2003

*File name : CL51007A.ROM (V0.07)
*Checksum  : AB12

SYS:
        Fix:
          1. Resume from hibernate system can enter SCU by press F2    #AC025
          2. Press "Fn+PgDn" cause system booting from CD-ROM          #BC060
          3. Can't write DMI string                                    #BC066
          4. Show "WARNING-CMOS CHECKSUM INVAL ID-RUN SCU" after flash #BC043
          5. Install Win2000 fail
          6. Press F2 will launch system detail,look at screen lower
             have remains thing                                        #BC034
        Add:
          1. OSB Function
          2. Boot Sequence Function
EC:
        Fix:
          1: Solve LCD backlight turns on early when enter crisis mode.
	  2: Solve when press Fn+Up (or Down/PgUp/PgDn) and depress Fn first, Dritek driver
	     will not show OSD when press Fn+Up (or Down/PgUp/PgDn) next time.
	  3: Solve press Fn+F11 and depress Fn first, Numlock LED and keypad function
             not match.
        Modify:
          1: Modify system will wake up from S2R mode when R.S.O.C <= 5%.
*******************************************************************************
DCL51 ALL-BIOS release                                               05/23/2003

*File name : CL51006A.ROM (V0.06)
*Checksum  : 6911

SYS:
        Fix:
          1. S3 resume time over 5 sec                                   #BC035
          2. Battery Meter detailed information show not correct message #BC025
          3. "Winbond secure digiatal storage(SD/MMC)device driver"      #AC046
          4. Ultra DMA show not correct                                  #BC055
          5. Extended memory show "++++++" when memory up to 1GB         #BC053
        Modify:
          1. Take off Japanese language item of SCU
        Add:
          1. HOT SWAP Function                                           #BC048
EC:
        Moddify:
	1: Modify Hotkey function :
	   Windows Media Player(Fn+F6:Play, Fn+F7:Stop, Fn+F8:Rewind, Fn+F9:Next)
	   Fn+F4 : WLAN ON/BT ON/BOTH ON
	2: Modify Battery amber led will on 1 second every 5 seconds when R.S.O.C <= 10%.
	3: Modify Battery blue led will on 1 second every 3 seconds when at charging mode.
	4: Modify to clear killswitch states when Dritek driver not on.
*******************************************************************************
DCL51 ALL-BIOS release                                               05/20/2003

*File name : CL51005A.ROM (V0.05)
*Checksum  : 3552

SYS:
        Fix:
        1. System can't show proper information under P.O.S.T #AC034
        2. Brightness value can't keep when SCU load default
        3. System got beep sound when POST                    #AC033
        4. Power button into S3 in DOS mode

        Modify:
        1. Modify FIR default setting doesn't match Spec      #AC031 #AC032
        2. Remove CPU & L2 cache message before boot to OS.   #AC034
        3. Remove Shared_memory size string under P.O.S.T

        Add:
        1. 'C' key boot from CD-ROM

EC:
        Fix:
	1: TouchPad can't work.
	2: Solve CapslockLED NumlockLED PadslockLED will on at S2R.
	3: Solve Wireless LED is light up when system power on even without wireless
	   board and Wireless SW is turn off.
	4: Solve when press Fn+PgUp or Fn+PgDn(adjust volume), depress Fn and keep press
	   PgUp(PgDn), system will keep adjust volume and "Volume" character will display
           on the LCD screen.

        Modify:
	1: Enable Throttling function.
	2: Modify the keyboard matrix of PgUp(Volume up) to right icon and
	   PgDn(Volume down) to left icon.
	3: Modify the hotkeys of F10 (Pads lock -> Cursor lock) and F11	(Number lock).
	4: Modify function BlueToothProcess().

*******************************************************************************
DCL51 ALL-BIOS release                                               05/09/2003

*File name : CL51004A.ROM (V0.04)
*Checksum  : E924

SYS:
        Fix:
        1. PCMCIA Card can't work
        2. 'Fn+F5' key can't display switch in OS and DOS mode

        Add:
        1. Detect Wireless Lan

        Modify:
EC:
        It's base on v0.01
        Fixed:
        Known issue:
	1: Solve Wireless LED is light up when system power on even without wireless
	   board and Wireless SW is turn off.
        Modified:
        Add function:
*******************************************************************************
DCL51 ALL-BIOS release                                               05/07/2003

*File name : CL51003A.ROM (V0.03)
*Checksum  : E502

SYS:
        Fix:
        1. CD-ROM can't boot
        2. CMOS checksum will error when every time enter SCU and Exit
        3. SD Card can't work
        4. CD-ROM no power

        Modify:
        1. Remove POST string include system date,project id and eval only message

        Add:
        1. Brightness hot key function
        2. DOS mode display switch hot key function
        3. 'ESC' key show boot menu
        4. 'F12' key boot from LAN

EC:
        Fix:
	1: Solve CapslockLED NumlockLED PadslockLED will on at S2R.
	2: Solve Wireless LED is light up when system power on even without wireless
	   board and Wireless SW is turn off.
	3: Solve when press Fn+PgUp or Fn+PgDn(adjust volume), depress Fn and keep press
	   PgUp(PgDn), system will keep adjust volume and "Volume" character will display
           on the LCD screen.

*******************************************************************************
DCL51 ALL-BIOS release                                               04/30/2003

*File name : CL51002A.ROM (V0.02)
*Checksum  : A45C

SYS:
        Fix:
        1. Can't boot from PXELAN
        2. Panel ID detect error
        3. System can't restart from SCU or DOS mode
        4. Fix lid can NOT enter S3.
	5. Fix system enter S4 will hang up.
	6. Fix system will hang up when open the battery item.
        7. Fix battery only can NOT enter S3.

        Modify:
        1. HDD and CD/DVD String error of SCU

        Add:
        1. bios version of DMI type0 and E840h

EC:
        Modified:
	1: Modify the keyboard matrix of PgUp(Volume up) to right icon and
	   PgDn(Volume down) to left icon.
	2: Modify the hotkeys of F10 (Pads lock -> Cursor lock) and F11	(Number lock).
	3: Modify function BlueToothProcess().

*******************************************************************************
DCL51 ALL-BIOS release                                               04/22/2003

*File name : CL51001A.ROM (V0.01)
*Checksum  : 7A44

SYS:
        1.First Release for DCl51
EC:
        Modified:
        1.Modify the thermal handling routine.