©2002 KURIAKI BIOS DATABASE MX3W Pro/-E/-V mx3wp133.zip R1.33 08/13/01 248KB Checksum 135Eh Fixed "USB Keyboard can not work successfully with PS/2 Wheel Mouse" in Win98SE. mx3wp132.zip R1.32 07/16/01 248KB Checksum 5435h Updates flashing utility. Supports Intel CPU Ratio up to x12. Sets default CPU ratio of safe boot (by pressing [HOME] key) at 133MHz from x3.0 to x4.0. Modifies power management. mx3wp128.zip R1.28 04/18/01 246KB Checksum 9355h Fixes shattered EPA logo with CMOS cleared. mx3wp127.zip R1.27 03/28/01 246KB Checksum 5449h Fixed failure of resuming from S3 with some CD-ROM drive (such as ASUS 50X). Change default year from 2000 to 2001. Supports VIA Cyrix III CPU (133 x 4.5). Fixed incompatibility with generic USB FDD. Updates BIOS flashing utility. Fixed system hang-up with COM port barcode reader in Windows 98. Updates VGA BIOS to D8102553. mx3wp126.zip R1.26 02/23/01 225KB Checksum 173Fh Displays CPU front side bus frequency and clock ratio on POST screen. Modify safe mode ratio value FSB133MHz => X3; FSB100MHz => X3.5; FSB 66MHz => X4.5. mx3wp125.zip R1.25 02/13/01 200KB Checksum 5ED1h Fixed failure to enter S3 standby in Win ME with USB keyboard or mouse installed. Fixed repeated detection of USB keyboard and mouse in Win 98SE after resuming from S3. Fixed malfunction of USB mouse after resuming from S3 in Win 2000 Professional. mx3wp124.zip R1.24 09/29/00 202KB Checksum DF96h Corrects Type 04h for Celeron Processor Familly. mx3wp120.zip R1.20 07/04/00 200KB Checksum 1A47h Correction of CPU detection: Reports 900MHz instead of 901MHz for Coppermine 900(100x9). No longer displays 'B' or 'E' for Coppermine 128K (Celeron) CPU. Reports 800 for Coppermine 800/100 instead of 800E. Adds suffix 'A' to Coppermine128K 533MHz CPU. Fixes error of detecting 800MHz CPU as 788MHz. Updates BIOS flashing utility. Fixes boot failure with NT4.0 bootable CD when there's only one SCSI HDD. Fixes boot failure from SCSI HDD when 2 SCSI HDDs connected. Fixes "Hard Disk Diagnosis" failure with "ATA66/33 Cable Detection" disabled. Fixes system hang-up when reading AOpen FM56-SM PCI modem card info. Fix system hang if wake-up by USB KB/Mouse in Win98/SE. Changes DRAM clock settings from "133/100" MHz to "PCI CLK x4/PCI CLK x3". mx3wp116.zip R1.16 05/24/00 201KB Checksum C49Ah Fixes system hang while reading AOpen FM56-SM PCI modem card info. Fixes system hang when wake-up by USB KB/Mouse in Win98/SE. Changes DRAM clock setting from "133/100" MHz to "PCI CLK x4/PCI CLK x3". Updates flashing utility. mx3wp115.zip R1.15 05/03/00 199KB Checksum 6059h Improves compatibility with IDE devices. Automatically detects display cache. mx3wp113.zip R1.13 04/17/00 199KB Checksum BE72h Breaks boot sequence "LS/ZIP" into two different options, "LS120" and "ZIP". Fixes malfunction of serial mouse after resuming from S1. New microcodes for FC-PGA Coppermine CPU. mx3wp106.zip R1.06 01/28/00 195KB Checksum 8D11h Supports PME function. Compatible with HCT ACPI stress test. Improved LAN card stability in Windows 2000 RC2 and later revisions. Adds 'Boot Up Floppy Seek' item in Advanced BIOS Feature Setup menu. No longer shows 'B' or 'E' for Katmai/Cuppermine CPU of frequencies over 600MHz, following Intel's terminology. Supports emulation of ZIP drives as HDD, depending on jumper setting of the drives. [Note] Please follow steps below to flash this new type BIOS of MX3W Pro Series motherboards. Procedure: Download this zipped file. Run shareware PKUNZIP (http://www.pkware.com/) which supports miscellaneous operation systems to extract the binary BIOS file and the flash utility. Or Winzip (http://www.winzip.com/) in Windows environment. Save "MX3WP106.EXE" and "MX3WP106.BIN" to a DOS floppy disk. Reboot your system with this disk without loading any memory handler (suh as EMM386) or device driver to get as much free space as possible. If you have an EPROM writer, simply take the .BIN file to program your BIOS. Execute A:>MX3WP106 and the program will do the rest of it. DO NOT turn off power during flashing process, until you are asked to!! Reboot system and press "DEL" to enter BIOS setup, load "BIOS SETUP DEFAULT", then SAVE and EXIT. Done! mx3wp100.exe R1.00 12/30/99 230KB Initial Release Checksum 4045h [Note] The AOpen Easy Flash way does not apply to this new 4Mb BIOS. Please follow steps below to flash the MX3W Pro BIOS. Procedure: Download this self-extracting file and execute it to get the binary BIOS file, flash and checksum utilities. Run "CHECKSUM MX3WPxxx.BIN" to see if the checksum of the downloaded file is exactly the same as indicated. If not, do the downloading again. Save "AOFL170.EXE" and "MX3WPxxx.BIN" to a DOS floppy disk. Reboot your system with this disk without loading any memory handler (suh as EMM386) or device driver to get as much free space as possible. Execute A:>AOFL170 MX3WPxxx.BIN. DO NOT turn off the power during flashing process, until you are asked to!! Reboot system and press "DEL" to enter BIOS setup, load "BIOS SETUP DEFAULT", then SAVE and EXIT. Done!