BIOS release 1.2 for VI7 V1.0 Release information: [ENGLISH] 0. Change the value of SATA Rx5E[3:0]. 1. Auto detect if there's no devices installed on IRQ 12,14,15, then it could be assigned by the BIOS PIRQ. 2. Add a warning message after there's some change regarding hard disk and add the option "HDD Change message" in BIOS Feature section. 3. Remove the string "An Energy Star ally" on the BIOS post screen. 4. Improve ACPI function. 5. Change the wording in PC Health section from "DDR VDDQ Voltage" to "DDR VTT Voltage". 6. Fix the issue that FAN Fail Shutdown will not function after resume from S1 or S3 state. 7. Change the wording in System Configuration from "DDR at DIMM(s)" to "DDR at DIMM". 8. Fix the issue that there are two CPU information in DMI data and remove COM2 information. 9. BIOS compile date: 09/05/2003 [中文] 0. 修正 SATA Rx5E[3:0] 的數值。 1. 自動偵測 IRQ 12.14.15,若沒有安裝裝置,才開放 BIOS 中的 PIRQ 指定。 2. 增加 HDD 被更動的警告訊息,並增加 BIOS Feature 中 HDD Change Message 控制選項。 3. 在 BIOS POST 第一個畫面中移除 "An Energy start ally" 字串。 4. 修正 ACPI function。 5. 修改 BIOS Setup 中 PC Health 內選項字串 "DDR VDDQ Voltage" to "DDR VTT Voltage"。 6. 修正系統由 S3 與 S1 resume 後,FAN fail shutdown 功能失效。 7. 修改 System configurations 中字串 "DDR at DIMM(s)" to "DDR at DIMM"。 8. 修正 DMI 出現兩個 CPU Information 並移除 DMI 中 COM2 information. 9. BIOS 日期: 9/05/2003。 ********************************* NOTE ********************************* 1. How to upgrade BIOS: a. Boot into MS-DOS or "Safe mode and command prompt" if you are using Windows95/98 b. Run "vi712.exe" to extract all files. c. Run "runme.bat" *** Please notice that we suggest you flashing the bios with switches "/py /sn /cd /cp /cc /cks /R" or by "runme.bat". d. For more detail, please visit: http://fae.abit.com.tw/cht/download/bioshelp.htm (Chinese) http://fae.abit.com.tw/eng/download/bioshelp.htm (English) 2.After BIOS updated, pull off the power cord and then clear the CMOS data via jumper before restarting system please. ============================================================================