Official BIOS release 7C for TH7II/TH7II-RAID

Release information:

[ENGLISH]

1. Support NorthWood 2.4G(100x24) CPU.
2. Support P4 Celeron CPU.
3. Raise the adjustable CPU Core Voltage for 0.13 micron process
   P4 (Northwood).
4. Fix occasional no POST with debug code 26 issue while "Fixed AGP=66"
   option was enabled in SoftmenuIII.
5. Support up to 137GB HDD and above.
6. HPT 37x BIOS version 2.0.1024. The RAID function is for TH7II-RAID
   only. This BIOS version is also for non RAID boards and HPT BIOS
   will be automatically disabled while RAID controller chip not
   detected.
7. BIOS compile date: 4/19/2002.

[TRADITIONAL CHINESE]

1. 支援 NorthWood 2.4G(100x24) CPU。
2. 支援 P4 Celeron CPU。
3. 針對 0.13 製程 P4 CPU 提高核心電壓可調整範圍。
4. 修正啟用 "Fixed AGP=66" 選項時偶而開機失敗，偵錯 LED 顯示 26 的問題。
5. 支援容量 137GB 以上的硬碟。
6. HPT 370 BIOS version: 2.0.1024。適用於 TH7II-RAID。本 BIOS 同時適用於
   非 RAID 之主機板上。當 BIOS 偵測到您使用的主機板不含 RAID 時將會自動 
   disable HPT BIOS。
7. BIOS 日期: 4/19/2002。


*********************************  NOTE  *********************************

1. How to upgrade BIOS:

 a. Boot into MS-DOS or "Safe mode and command prompt" if you are using 
    Windows95/98
 b. Run "th7h7c.exe" to extract all files.
 c. Run "runme.bat"

   ***  Please notice that we suggest you flashing the bios with switches 

           "/py /sn /cd /cp /cc /cks /R" or by "runme.bat".  

 d. For more detail, please visit:

    http://fae.abit.com.tw/cht/download/bioshelp.htm  (Chinese)
    http://fae.abit.com.tw/eng/download/bioshelp.htm  (English)

2.After BIOS updated, pull off the power core and then clear the CMOS data 
  via jumper before restarting system please.


============================================================================