Official BIOS release 6A for ST6 / ST6-RAID

Release information:

[ENGLISH]

1. Fix the unbootable issue when installing a hard disk onto IDE-2 and 
   set the boot sequence by following as HDD_1, HDD_0 then floppy.
2. Support Tualatin Celeron 1.3 GHz.
3. HPT BIOS version: 2.0.1024.
4. BIOS compile date: 11/27/2001

[TRADITIONAL CHINESE]

1. 解決當安裝一顆硬碟於 IDE-2 上，並將開機順敘設為HDD_1, HDD_0, floppy時
   無法開機的問題。
2. 支援 Tualatin Celeron 1.3 GHz。
3. HPT BIOS 版本: 2.0.1024。
4. BIOS 日期: 11/27/2001。


*********************************  NOTE  *********************************

1. How to upgrade BIOS:

 a. Boot into MS-DOS or "Safe mode and command prompt" if you are using 
    Windows95/98
 b. Run "st66a.exe" to extract all files.
 c. Run "runme.bat"

   ***  Please notice that we suggest you flashing the bios with switches 

           "/py /sn /cd /cp /cc /cks /R" or by "runme.bat".  

 d. For more detail, please visit:

    http://fae.abit.com.tw/cht/download/bioshelp.htm  (Chinese)
    http://fae.abit.com.tw/eng/download/bioshelp.htm  (English)

2.After BIOS updated, pull off the power core and then clear the CMOS data 
  via jumper before restarting system please.


============================================================================