BIOS release 1.1 for Si-1Ns  V1.0
                                    

Release information:

[ENGLISH]

1. Fixed the problem that system fails to boot up after loads 
    Fail-safe defaults.
2. Updated VGA BIOS to BDG_2975.DAT.
3. Updated CPU Micro Code (Added CPUID=0F29h, 0F25H. 
    Update CPUID=0F27H, 0F24H).
4. Fixed the problem that test program "Check It" gets different date 
    from CMOS setting after RTC failed.
5. Changed the default setting of "CPU Clock Ratio" to "CPU Ratio
    maximum" after "Load Optimized Defaults".
6. BIOS Compile date: 8/13/2003.


[中文]

1.修正load fail-safe default系統不能開機。
2.更新VGA BIOS 至BDG_2975.DAT。
3.更新CPU Micro code。(Added CPUID =0F29h,0F25H. 
   Updated CPUID=0F27H,0F24H) 
4.修正當RTC fail 後,測試程式”Check It”偵測到日期與CMOS 
   設定不一致。
5.“CPU Clock ratio” Optimized Default 改為 CPU Ratio　maximum。
6.BIOS 日期: 8/13/2003。




*********************************  NOTE  *********************************

1. How to upgrade BIOS:

 a. Boot into MS-DOS or "Safe mode and command prompt" if you are using 
    Windows95/98
 b. Run "si1ns11.exe" to extract all files.
 c. Run "runme.bat"

   ***  Please notice that we suggest you flashing the bios with switches 

           "/py /sn /cd /cp /cc /cks /R" or by "runme.bat".  

 d. For more detail, please visit:

    http://fae.abit.com.tw/cht/download/bioshelp.htm  (Chinese)
    http://fae.abit.com.tw/eng/download/bioshelp.htm  (English)

2.After BIOS updated, pull off the power cord and then clear the CMOS data 
  via jumper before restarting system please.


============================================================================