BIOS release 1.6 for AG8 V1.0

Release information:

[ENGLISH]

1. Changed default stand-by mode from S1 to S3 to meet WHQL requirement.
   This function should be accompanied by changing USB-PWR Jumper setting
   from default 1-2 (disabled wake-up) to 2-3 (enabled wake-up). Please
   refer to user's manual and check correct jumper position.
2. BIOS compile date: 09/09/2004


[中文]

1. 修改預設待命模式由 S1 改為 S3 以符合WHQL 需求. 此功能需同時更改 USB-PWR
   跳線由預設PIN 1-2 (關閉喚醒) 改至 2-3 (啟動喚醒). 詳情請參考使用手冊之
   相關詳細設定.
2. BIOS 日期: 09/09/2004


*********************************  NOTE  *********************************

1. How to upgrade BIOS:

 a. Boot into MS-DOS or "Safe mode and command prompt" if you are using
    Windows95/98
 b. Run "AG816.EXE" to extract all files.
 c. Run "runme.bat"

   ***  Please notice that we suggest you flashing the bios with switches

           "/py /sn /cd /cp /cc /cks /R" or by "runme.bat".

 d. For more detail, please visit:

    http://fae.abit.com.tw/cht/download/bioshelp.htm  (Chinese)
    http://fae.abit.com.tw/eng/download/bioshelp.htm  (English)

2.After BIOS updated, pull off the power cord and then clear the CMOS data
  via jumper before restarting system please.


============================================================================