Official BIOS release 8M for NV7-133R

Release information:

[ENGLISH]

1. Fix POST procedure freezing up for several minutes without monitor 
   display (POST code 2Bh) when plug Matrox G550, G450 AGP card onto 
   the system.
2. Fix certain CD-R/W device can not Enable UDMA mode under Win XP.
3. Add "CPU Operating Speed" function in SoftMenu.
4. HPT 372 BIOS Version 2.31. 
5. BIOS compile date: 6/05/2002


[CHINESE]

1. 修正 Matrox G550,G450 AGP card 在 POST 時, 畫面沒有顯示，而 POST code
   停在 2Bh 達數分鐘。
2. 修正某些CD-R/W device 無法在WinXP Enable UDMA mode。
3. 在 SoftMeun 內加入 "CPU Operating Speed"  function。
4. 更新 HPT BIOS 為 v2.31。
5. BIOS 日期: 6/05/2002。




*********************************  NOTE  *********************************

1. How to upgrade BIOS:

 a. Boot into MS-DOS or "Safe mode and command prompt" if you are using 
    Windows95/98
 b. Run "nv78m.exe" to extract all files.
 c. Run "runme.bat"

   ***  Please notice that we suggest you flashing the bios with switches 

           "/py /sn /cd /cp /cc /cks /R" or by "runme.bat".  

 d. For more detail, please visit:

    http://fae.abit.com.tw/cht/download/bioshelp.htm  (Chinese)
    http://fae.abit.com.tw/eng/download/bioshelp.htm  (English)

2.After BIOS updated, pull off the power cord and then clear the CMOS data 
  via jumper before restarting system please.


============================================================================.