BIOS release 2.0 for NF7 / NF7-S 2.0


Release information:

[ENGLISH]

1. Please use AWDFLASH 8.23D or later to update NF7 series BIOS. With 
   incorrect AWDFLASH version, the GUID will be erased, and leads to 
   IEEE1394 peer to peer function failed. AWDFLASH 8.23K is included in 
   this BIOS package.
2. Fixed the issue that Duron 1.2G and 1.3G will not boot using BIOS 
   version 19.
3. Add nVidia System Utility support. Please download the nvsuoem.ini 
   file and install nVidia System Utility with this ini file (put the 
   ini file in the directory where the setup up file for nVidia System 
   Utility is located).
   http://fae.abit.com.tw/download/bios/nf7-s_2.0/nvsuoem.ini
4. Enhanced compatibility with certain WD hard disk.
5. BIOS compile date: 11/21/2003.



[中文]

1. 請使用 AWDFLASH 8.23D 或更新版本來更新 NF7 系列主機板之 BIOS。使用不適當
   版本的 AWDFLASH 程式，會消除 GUID 並導致 IEEE1394 peer to peer 功能失效。
   AWDFLASH 8.23K 已包含在本 BIOS 自解檔案中。
2. 修正使用 BIOS 1.9 時 , 安裝Duron 1.2G 和 1.3G, 系統無法開機的問題。
3. 新增支援nVidia 系統工具。 請下載 nvsuoem.ini 以用於安裝 nVidia 系統工具 
   (請將 ini 檔案放在 nVidia 系統工具的原始安裝資料夾)。
   http://fae.abit.com.tw/download/bios/nf7-s_2.0/nvsuoem.ini
4. 增進WD 硬碟的相容性。
5. BIOS 日期: 11/21/2003。



*********************************  NOTE  *********************************

1. How to upgrade BIOS:

 a. Boot into MS-DOS or "Safe mode and command prompt" if you are using
    Windows95/98
 b. Run "nf7d20.exe" to extract all files.
 c. Run "runme.bat"

   ***  Please notice that we suggest you flashing the bios with switches

           "/py /sn /cd /cp /cc /cks /R" or by "runme.bat".

 d. For more detail, please visit:

    http://fae.abit.com.tw/cht/download/bioshelp.htm  (Chinese)
    http://fae.abit.com.tw/eng/download/bioshelp.htm  (English)

2.After BIOS updated, pull off the power cord and then clear the CMOS data
  via jumper before restarting system please.


============================================================================