BIOS release 1.8 for NF7/NF7-S v2.0

Release information:

[ENGLISH]

0. Please use AWDFLASH 8.23D or later to update NF7 series BIOS. With 
   incorrect AWDFLASH version, the GUID will be erased, and leads to 
   IEEE1394 peer to peer function failed. AWDFLASH 8.23K is included in 
   this BIOS package.
1. Fixed the problem that system hangs up with POST code 01 while resuming 
   from STR mode with user defined DRAM timings. With default SPD setting, 
   no problem at all and doesn't need this update.
2. Fixed the problem that system hangs up at POST code FF with over clocking 
   setting- change the multiplier factor from CPU default to 19.
3. Fixed the problem that Barton 2500+ CPU is occasionally detected as 
   Barton 3200+. If 400 FSB CPU is installed, users need to select correct 
   CPU type in SoftMenuIII by themselves.
4. BIOS Compile date: 7/24/2003.

[中文]

0. 請使用 AWDFLASH 8.23D 或更新版本來更新 NF7 系列主機板之 BIOS。使用不適
   當版本的 AWDFLASH 程式，會消除 GUID 並導致 IEEE1394 peer to peer 功能失效。
   AWDFLASH 8.23K 已包含在本 BIOS 自解檔案中。 
1. 修正不使用記憶體SPD參數預設值而手動指定其他參數時，系統從STR模式喚醒時
   當機沒有畫面顯示的問題。
2. 修正超頻測試時將CPU倍頻從預設值調到19倍頻無法開機的問題。
3. 修正偶發性Barton 2500+ CPU被誤認為Barton 3200+導致系統於超頻狀態下不穩定
   的問題, 如果使用400FSB CPU 請在SoftMenuIII 選擇正確的CPU 型式。
4. BIOS 日期:  7/24/2003.



*********************************  NOTE  *********************************

1. How to upgrade BIOS:

 a. Boot into MS-DOS or "Safe mode and command prompt" if you are using 
    Windows95/98
 b. Run "nf7d18.exe" to extract all files.
 c. Run "runme.bat"

   ***  Please notice that we suggest you flashing the bios with switches 

           "/py /sn /cd /cp /cc /cks /R" or by "runme.bat".  

 d. For more detail, please visit:

    http://fae.abit.com.tw/cht/download/bioshelp.htm  (Chinese)
    http://fae.abit.com.tw/eng/download/bioshelp.htm  (English)

2.After BIOS updated, pull off the power cord and then clear the CMOS data 
  via jumper before restarting system please.


============================================================================