Official BIOS release 1.1 for NF7-S v1.0

Release information:

[ENGLISH]

0.Please use AWDFLASH 8.23Dor later to update NF7 series BIOS. With  
  incorrect AWDFLASH version, the GUID will be erased, and leads to 
  IEEE 1394 peer to peer function failed. AWDFLASH 8.23D is included in 
  this BIOS package.
1.The default of "Enhance PCI Performance" option set up to disabled.
2.Init Display Fist item revised to AGP.
3.Update Sil BIOS to 4.1.36C.
4.Update BPL ROM file to 2.72.
5.USB can’t assign IRQ when cards are installed on PCI Slot2/Slot 3.
6.Fix issue where Keyboard98 is selected, the Keyboard Wake Up key can't 
  wake up system.
7.Fix system resume failed, and hanged at 01h issue after S0->S3->S0->S3->S0.
8.MAC Address fills into UUID. Fill in from the first till the sixth byte, if     the seventh to sixteenth are not filled in with certain numbers, fill "00"
  or reserve the original.  
9.BIOS compile Date: 11/14/2002.



[TRADITIONAL CHINESE]

0. 請使用 AWDFLASH 8.23D 或更新版本來更新 NF7 系列主機板之 BIOS. 使用不適當
   版本的 AWDFLASH 程式，會消除 GUID 並導致 IEEE1394 peer to peer 功能失效。   
   AWDFLASH 8.23D 已包含在本 BIOS 自解檔案中。
1. 將 "Enhance PCI Performance" 選項的預設值更改為"Disabled"。
2. 將 "Init Display First" 選項預設值更改為 AGP。
3. 更新 Sil BIOS file 為 4.1.36C。
4. 更新 BPL ROM file 為 2.72。
5. 修正在PCI Slot2 或 Slot3 插上界面卡會導致 USB 無法分置 IRQ。
6. 解決當選取 Keyboard98 時，使用鍵盤的 "Wake Up" 鍵時無法喚醒系統。
7. 修正在 S3 模式下，系統無法喚醒，偵錯碼顯示 01h。
8. 修改 MAC Address 填入 UUID 的方式。
9. BIOS 日期: 11/14/2002。

*********************************  NOTE  *********************************

1. How to upgrade BIOS:

 a. Boot into MS-DOS or "Safe mode and command prompt" if you are using 
    Windows95/98
 b. Run "nf711.exe" to extract all files.
 c. Run "runme.bat"

   ***  Please notice that we suggest you flashing the bios with switches 

           "/py /sn /cd /cp /cc /cks /R" or by "runme.bat".  

 d. For more detail, please visit:

    http://fae.abit.com.tw/cht/download/bioshelp.htm  (Chinese)
    http://fae.abit.com.tw/eng/download/bioshelp.htm  (English)

2.After BIOS updated, pull off the power cord and then clear the CMOS data 
  via jumper before restarting system please.


============================================================================.